MN Hobs

Azdırma Çakısı İmalatı

We manufacture hobbing knives from 0.5 modules to 20 modules. At the same time, we have different modules and sizes in our stock.

The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.

* The cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.

Azdırma Çakısı İmalatı MN Azdırma Çakısı Azdırma Çakısı Modül Azdırma Çakısı
Mn Hobs Sample Dimensions

No Modül 30 D(Outer Diameter) L (Length) d(Hole)
1 M 0,5 D 50 L 60 d 22
2 M 0,6 D 50 L 60 d 22
3 M 0,7 D 50 L 60 d 22
4 M 0,75 D 50 L 60 d 22
5 M 0,8 D 35 L 50 d 16
6 M 0,8 D 50 L 60 d 22
7 M 0,9 D 50 L 60 d 22
8 M 1 D 50 L 60 d 22
9 M 1,25 D 50 L 40 d 22
10 M 1,25 D 50 L 55 d 22
11 M 1,5 D 55 L 60 d 22
12 M 1,6 D 55 L 60 d 22
13 M 1,75 D 55 L 60 d 22
14 M 1,9 D 55 L 60 d 22
15 M 2 D 55 L 60 d 22
16 M 2 D 70 L 70 d 32
17 M 2 D 70 L 70 d 32
18 M 2 D 80 L 90 d 32
19 M 2,1 D 55 L 60 d 22
20 M 2,25 D 60 L 65 d 22
21 M 2,5 D 60 L 70 d 22
22 M 2,75 D 65 L 70 d 22
23 M 3 D 70 L 80 d 22
24 M 3,25 D 70 L 80 d 27
25 M 3,5 D 75 L 70 d 22
26 M 3,5 D 75 L 90 d 27
27 M 3,75 D 80 L 90 d 27
28 M 4 D 80 L 90 d 27
29 M 4,25 D 80 L 90 d 27
30 M 4,5 D 80 L 95 d 27
31 M 4,75 D 90 L 100 d 27
32 M 5 D 90 L 100 d 27
33 M 5,25 D 90 L 100 d 27
34 M 6 D 100 L 110 d 32
35 M 7 D 100 L 115 d 32
36 M 7 D 115 L 105 d 32
37 M 8 D 110 L 120 d 40
38 M 9 D 115 L 130 d 40
39 M 10 D 120 L 140 d 40
40 M 10 D 150 L 135 d 40

DP Hobs

Dp Azdorma Çakısı İmalatı

We manufacture DP hobs from 100 Dp to 0.65 Dp. At the same time, we have different modules and sizes in our stocks.

The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.

* Hobs Sample DimensionsThe cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.

Azdırma Çakısı İmalatı DP Azdırma Çakısı DP Azdırma İmalatı DP Azdirma Çakıları
DP Hobs Sample Dimensions

No DP 30 D(Outer Diameter) L (Length) d(Hole)
1 DP 32 D 50 L 50 d 22
2 DP 25 D 50 L 50 d 22
3 DP 24 D 50 L 50 d 22
4 DP 22 D 50 L 50 d 22
5 DP 20 D 50 L 55 d 22
6 DP 18 D 55 L 55 d 22
7 DP 16 D 55 L 55 d 22
8 DP 14 D 55 L 55 d 22
9 DP 12 D 55 L 60 d 22
10 DP 10 D 65 L 70 d 22
11 DP 8 D 75 L 80 d 27
12 DP 7 D 80 L 85 d 27
13 DP 6 D 85 L 90 d 27
14 DP 5 D 90 L 110 d 27
15 DP 4 D 110 L 110 d 32
16 DP 3,75 D 110 L 115 d 32
17 DP 3,5 D 110 L 120 d 32
18 DP 3,25 D 120 L 125 d 32
19 DP 3 D 120 L 130 d 32
20 DP 2,75 D 135 L 150 d 40
21 DP 2,5 D 140 L 150 d 40

CP Gear Hobs

CP Azdırma Çakısı İmalatı

We manufacture CP hobbing knives from 3/16 Cp to 3 Cp. At the same time, we have different modules and sizes in our stock.

The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.

* Hobs Sample DimensionsThe cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.

CP Azdırma Çakısı Azdırma Çakısı İmalatı CP Azdırma Çakısı İmalatı Cp Azdirma Çakilari

Timing Belt Pulley Hobs

Triger Azdirma Çakısı

Timing Belt Bulley Hobs of different sizes are available in our production. At the same time, we have different modules and sizes of pocket knives in our stock.

The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.

* Hobs Sample DimensionsThe cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.

Triger Azdırma Çakısı Azdırma Çakısı İmalatı Azdırma Çakıları Triger Azdırma Çakıları
Timing Belt Bulley Hobs Sample Dimensions

No Triger D(Outer Diameter) L (Length) d(Hole)
1 MXL – 2,032 D 50 L 50 d 22
2 T 2,5 D 50 L 50 d 22
3 T 5 D 60 L 60 d 27
4 AT 5 D 60 L 60 d 27
5 XL – 5,08 D 60 L 60 d 27
6 T 8 D 65 L 65 d 27
7 L – 3/8″ – 9,525 D 65 L 65 d 27
8 T 10 D 70 L 70 d 27
9 AT 10 D 70 L 70 d 27
10 H – 1/2″ – 12,7 D 70 L 70 d 27
11 T 20 D 75 L 75 d 27
12 AT 20 D 80 L 80 d 27
13 XH – 22,225 D 80 L 100 d 27
14 XXH – 31,75 D 100 L 120 d 32
15 2M – HTD D 50 L 50 d 22
16 S2M – STD D 50 L 50 d 22
17 3M – HTD D 50 L 50 d 22
18 S3M – STD D 50 L 50 d 22
19 S4,5M – STD D 60 L 53 d 27
20 5M – HTD D 65 L 65 d 27
21 S5M – HTD D 65 L 65 d 27
22 8M – HTD D 70 L 70 d 27
23 S8M – STD D 70 L 70 d 27
24 14M – HTD D 80 L 80 d 27
25 S14M – STD D 80 L 80 d 27

Chain Gear Hobs

Zincir Azdırma Çakısı İmalatı

We manufacture chain hobbing knives from 3/16 Cp to 3 Cp. At the same time, we have different modules and sizes in our stock.

The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.

* Hobs Sample DimensionsThe cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.

Zincir Azdırma Çakısı Azdırma Çakısı İmalatı Zincir Azdırma Çakısı İmalatı Zincir Azdırma Çakıları
Chain Gear Hobs Sample Dimensions

No Zincir r(Röle Çapı) D(Outer Diameter) L(Length) d(Hole)
1 6×4 r 4 D 60 L 70 d 22
2 1/4″ – (6,35) r 3,3 D 65 L 70 d 22
3 8×5 r 5 D 70 L 80 d 27
4 3/8″ – (9,525) r 5 D 70 L 50 d 27
5 3/8″ – (9,525) r 5,08 D 70 L 50 d 27
6 3/8″ – (9,525) r 6,35 D 80 L 90 d 27
7 1/2″ – (12,7) r 7,75 D 80 L 64 d 32
8 1/2″ – (12,7) r 8,51 D 80 L 90 d 27
9 5/8″ – (15,875) r 10,16 D 90 L 100 d 27
10 3/4″ – (19,05) r 12,07 D 100 L 110 d 32
11 1″ – (25,4) r 15,88 D 110 L 120 d 32
12 1-1/4″ – (31,75) r 19,05 D 130 L 150 d 40
13 1-1/2″ – ( 38,1) r 22,23 D 140 L 160 d 40
14 1-1/2″ – ( 38,1) r 25,4 D 140 L 160 d 40
15 1-3/4″ – (44,45) r 27,94 D 160 L 170 d 40
16 2″ – (50,8) r 29,21 D 160 L 170 d 40
17 2-1/2″ – (63,5) r 39,68 D 180 L 190 d 40
18 3″ – (76,2) r 48,75 D 200 L 210 d 40
19 3-1/2″ – (88,9) r 53,98 D 220 L 250 d 40
20 4″ – (101,6) r 63,5 D 230 L 260 d 50

Spline Hobs

Kamalı Mil Azdırma Çakısı İmalatı

There are Spline Hobs in different sizes in our production. At the same time, we have knives in different modules and sizes in our stock.

The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.

* Hobs Sample DimensionsThe cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.

Kamalı Mil Azdırma Çakıları Azdırma Çakıları İmalatı Kamali Mil Azdirma Cakisi Kamalı Mil Azdırma
Spline Hobs Sample Dimensions

No Ölçü Kanal D(Outer Diameter) L (Length) d(Hole)
1 35,5 x 28 x 8,6 K 6 (Memeli) D 65 L 75 27
2 35,5 x 28 x 8,6 K 6 D 65 L 75 27
3 25 x 21 x 5 K 6 D 63 L 60 27
4 34 x 28 x 7 K 6 D 63 L 50 27
5 38 x 32 x 8 K 6 D 63 L 50 27
6 42 x 36 x 8 K 6 D 70 L 63 27
7 60 x 52 x 14 K 6 D 90 L 85 32
8 30 x 26 x 6 K 6 D 63 L 50 d 27
9 32 x 26 x 7 K 6 D 70 L 63 d 27
10 36 x 32 x 6 K 8 D 70 L 63 d 27
11 40 x 36 x 7 K 8 D 80 L 70 d 27
12 46 x 42 x 8 K 8 D 80 L 70 d 27
13 58 x 52 x 10 K 8 D 80 L 70 d 32
14 62 x 56 x 10 K 8 D 90 L 80 d 32
15 68 x 62 x 12 K 8 D 100 L 90 d 32
16 16 x 13 x 4 K 6 D 55 L 45 d 27
17 20 x 16 x 4 K 6 D 60 L 50 d 27
18 22 x 18 x 5 K 6 D 60 L 50 d 27
19 25 x 19,9 x 5 K 6 D 62 L 46 d 27
20 25 x 21 x 6 K 6 D 63 L 60 d 27
21 32 x 26 x 6 K 6 D 70 L 63 d 27
22 38 x 32 x 6 K 8 D 70 L 70 d 27
23 42 x 36 x 7 K 8 D 80 L 80 d 27
24 48 x 42 x 8 K 8 D 70 L 63 d 32
25 54 x 46 x 9 K 8 D 100 L 90 d 32
26 82 x 72 x 12 K 10 D 100 L 90 d 32
27 92 x 82 x 12 K 10 D 110 L 90 d 40
28 102 x 92 x 14 K 10 D 110 L 100 d 40

Worm Gear Hobs

Sonsuz Vida Azdırma Çakıları

We manufacture worm screw and gear hobbing knives in different sizes. At the same time, we have different modules and sizes in our stock.

The knives we manufacture are produced in accordance with the quality standards by passing the quality control and customer satisfaction is always followed as the most important factor.

* Hobs Sample DimensionsThe cutting tools we produce comply with the quality standards and should not be equated with the 2nd quality cutting tools brought from abroad in the market. It should not be forgotten that it determines many factors such as its capacity, duration of atrophy, cleanness and quality of the work it opens.

Sonsuz Vida Azdırma Çakıları Sonsuz Vida Çakısı Azdırma Çakısı İmalatı Sonsuz Vida Azdirma Cakisi
Worm Gear Hobs Sample Dimensions

No Modül 20 D(Outer Diameter) L (Length) Mors
1 M 2 D 45 L 350 3 MORS
2 M 2 – 2GGR D 45 L 350 3 MORS
3 M 2,5 D 50 L 350 3 MORS
4 M 2,5 – 2GGR D 50 L 350 3 MORS
5 M 3 D 50 L 390 4 MORS
6 M 3 – 2GGR D 50 L 390 4 MORS
7 M 3,5 D 50 L 390 4 MORS
8 M 3,5 – 2GGR D 50 L 390 4 MORS
9 M 4 D 50 L 390 4 MORS
10 M 4 – 2GGR D 50 L 390 4 MORS